|
|
|
|||||||||
The series T 35, with fixed spindle, also includes a version with long table T 35 L, a version with front tenoning carriage T 35 C and another one with side tenoning carriage, T 35 CL. The T 35 features 4 speeds (max 8000 rpm). Spindle diameter according
to the destination country. |
|||||||||
|
| |
top |
|
|||||||||
Series T 35 I, with tilting spindle, also includes versions T 35 L/I, with long tables, and T 35 CL/I, with side tenoning spindle. |
|||||||||
|
|
top |
|
||||||
Spindle moulders T 40 are available in basic version and version "C" with sliding tenoning table, complete with swinging guide. T 40 are equipped 4 speeds (max 8000 rpm). Spindle diameter according
to the destination country. |
||||||
|
||||||
|
|
top |
|
||||||
| Series T 50 Spindle moulders are available in the following versions: basic T 50; T 50 L with long table and T 50 C with lateral tenoning carriage. All models are equipped with 5 speeds (max 10.000 rpm) and swinging control board. Optional: automatic lift of the spindle. It is also available as version T 50 S with extended table and lateral tenoning carriage; this model can be equipped, on request, with cut-off saw unit and auxiliary glazing bead unit with powered feeder. With this equipment it is specially suitable for the production of doors and windows. |
||||||
|
||||||
|
||||||
|
|
top |
|
||||||
| The standard equipment of the spindle moulders of the series T 55 I includes: powered spindle height and angle adjustment with decimal impulses; mechanical digital indicator of spindle height and electric read-out of the angle; overturning hood with aluminium fences, read-outs and hand wheels for shifting them together and adjusting the inlet one individually; adjustable gap on working table by a sliding plate; system for quick tool changing. | ||||||
|
||||||
|
